Stabilizer Bar Link: Installation
WARNING: This page is about a different car, the 2013 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
Install the stabilizer bar link.
-
NOTE: To install the nuts, use the hex holding feature to prevent the stabilizer link ball joints from turning while installing the nuts until snug. Finally, tighten the nuts using a socket and a torque wrench.
Install the new stabilizer bar link upper nut.
- Tighten to 150 Nm (111 lb-ft).
- Install the new stabilizer bar link lower nut.
- Tighten to 150 Nm (111 lb-ft).