Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the door trim panel finish panel screws.

Fig 1: Locating Door Trim Panel Finish Panel Screws
Courtesy of FORD MOTOR CO.
Reposition the door trim panel finish panel.

Fig 2: Locating Door Trim Panel Finish Panel
Courtesy of FORD MOTOR CO.
Remove the window control switch from the door trim panel finish panel.

Fig 3: Identifying Window Control Switch From Door Trim Panel Finish Panel
Courtesy of FORD MOTOR CO.
1. Remove the screws.
  - To install, tighten to 3 Nm (27 lb-in).
2. Remove the window control switch plate from the switch.
- Remove the window control switch.
To install, reverse the removal procedure.