APIM DTC Table
DTC CHART - APIM
| DTC | Description | Action |
|---|---|---|
| C1001:01 | Vision System Camera: General Electrical Failure | REFER to: PARKING AID . |
| B108E:01 | Display: General Electrical Failure | GO to PINPOINT TEST W |
| B116A:01 | Handset Microphone: General Electrical Failure | GO to PINPOINT TEST R |
| B1215:00 | External Memory Card: No Sub Type Information | GO to PINPOINT TEST S |
| B1252:11 | USB Port: Circuit Short To Ground | GO to PINPOINT TEST S |
| B1252:13 | USB Port: Circuit Open | GO to PINPOINT TEST S |
| B12B8:11 | USB Port #2: Circuit Short To Ground |
NOTE:
This DTC
refers to USB
port #2 on the APIM
itself, which is not used. INSPECT the APIM USB
port #2 for damage and remove any debris. CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC
B12B8:11 is retrieved again, INSTALL a new APIM
.REFER to: SYNC MODULE [APIM]
. |
| U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to PINPOINT TEST AC |
| U0151:00 | Lost Communication With Restraints Control Module: No Sub Type Information | GO to PINPOINT TEST AD |
| U0155:00 | Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information | GO to PINPOINT TEST AE |
| U0162:00 | Lost Communication With Navigation Display Module: No Sub Type Information | GO to PINPOINT TEST W |
| U016A:00 | Lost Communication With Global Positioning System Module: No Sub Type Information | GO to PINPOINT TEST AF |
| U0184:00 | Lost Communication With Radio: No Sub Type Information | GO to PINPOINT TEST AG |
| U0256:00 | Lost Communication With Front Controls Interface Module "A": No Sub Type Information | GO to PINPOINT TEST AJ |
| U0423:00 | Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information | RETRIEVE and follow Diagnostic Trouble Codes (DTCs) present in the IPC
. REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES . |
| U1A00:87 | Private Communication Network: Missing Message | GO to PINPOINT TEST C |
| U2017:45 | Control Module Software #2: Program Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC
U2017:45 is still present, INSTALL a new APIM
. REFER to: SYNC MODULE [APIM] . |
| U2017:51 | Control Module Software #2: Not Programmed | PROGRAM the APIM
. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . CLEAR the DTC . REPEAT the self-test. If DTC U2017:54 is still present, INSTALL a new APIM . REFER to: SYNC MODULE [APIM] . |
| REPEAT | the self-test. U2017:52 Control Module Software #2: Not Activated | PROGRAM the APIM
. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . CLEAR the DTC . REPEAT the self-test. If DTC U2017:54 is still present, INSTALL a new APIM . REFER to: SYNC MODULE [APIM] . REPEAT the self-test. |
| U2017:54 | Control Module Software #2: Missing Calibration | PROGRAM the APIM
. REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION . CLEAR the DTC . REPEAT the self-test. If DTC U2017:54 is still present, INSTALL a new APIM . REFER to: SYNC MODULE [APIM] . REPEAT the self-test. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK vehicle service history for recent service actions related to this module. This DTC
sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the APIM
programming as directed by the scan tool. REFER to: INFORMATION AND ENTERTAINMENT SYSTEM - SYSTEM OPERATION AND COMPONENT DESCRIPTION . See APIM PROGRAMMING . If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to: SYNC MODULE [APIM] . |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | CHECK vehicle service history for recent service actions related to this module. This DTC
sets due to incomplete or incorrect Programmable Module Installation (PMI) procedures. If there have been recent service actions with this module, REPEAT/PERFORM the APIM
programming as directed by the scan tool. REFER to: INFORMATION AND ENTERTAINMENT SYSTEM - SYSTEM OPERATION AND COMPONENT DESCRIPTION . See APIM PROGRAMMING . If there have been no recent service actions, INSTALL a new module to correct the failure to retain configuration data. REFER to: SYNC MODULE [APIM] . |
| U3000:04 | Control Module: System Internal Failure |
|
| U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC
U3000:41 is still present, INSTALL a new APIM
. REFER to: SYNC MODULE [APIM] . |
| U3000:42 | Control Module: General Memory Failure | CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC
U3000:42 is still present, INSTALL a new APIM
. REFER to: SYNC MODULE [APIM] . |
| U3000:88 | Control Module: Bus off |
NOTE:
Network communication/message Diagnostic Trouble Codes (DTCs) may result from intermittent concerns such as damaged wiring or low battery voltage occurrences. Additionally, vehicle repair procedures such as module reprogramming often set these Diagnostic Trouble Codes (DTCs). To avoid repeat network concerns, inspect for damaged or corroded wiring at the APIM
. Test the vehicle battery, refer to
CHARGING SYSTEM - GENERAL INFORMATION
. Replacing a module to resolve a network DTC
is unlikely to resolve the concern. The module could not communicate on the network at a point in time. The fault is currently not present. CLEAR the DTC
. REPEAT the network test with the scan tool. |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold | GO to PINPOINT TEST AN |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold | GO to PINPOINT TEST AO |