LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Climate Control System (EMTC)) >> Removal And Installation >> Receiver Drier >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Receiver Drier: Removal

WARNING: This page is about a different car, the 2013 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Before beginning any service procedure in this information, refer to Safety Warnings in SERVICE INFORMATION . Failure to follow this instruction may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
  1. Recover the refrigerant. Refer to AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
  2. Remove the front bumper cover. Refer to BUMPERS .
    1. To install, tighten to 8 Nm (71 lb-in).
    2. To install, tighten to 11 Nm (97 lb-in).
      G08617517