LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Explorer Sport >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bend >> General Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Procedure

NOTE: Refer to general specifications in the appropriate Engine article for the appropriate specification.
  1. Using the Feeler Gauge Set, measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    Fig 1: Measuring Connecting Rod Bend Using Feeler Gauge Set
    G06064090Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals