Suspension System - General Information: Specifications
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A | - |
TORQUE SPECIFICATIONS
| Description | Part Number | Torque |
|---|---|---|
| Strut upper mount nuts | W714682 | 62 Nm (46 lb-ft) |
| Tie-rod jam nuts, front | W713882 | 63 Nm (46 lb-ft) |
| Tie-rod jam nuts, rear | - | 80 Nm (59 lb-ft) |
| Upper arm-to-wheel knuckle nut | W520517 | 200 Nm (148 lb-ft) |
GENERAL SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Ride Height | |||
| Front (3.5L TiVCT AWD Vehicles) | 43.9 mm (1.7283 in) ±12 mm (0.4724 in) | ||
| Front (All FWD and AWD except 3.5L TiVCT and Police Vehicles) | 33.9 mm (1.3346 in) ±12 mm (0.4724 in) | ||
| Front (Police Vehicles) | 39.9 mm (1.5709 in) ±12 mm (0.4724 in)(1) | ||
| Rear (3.5L TiVCT AWD Vehicles) | 40 mm (1.5748 in) ±12 mm (0.4724 in) | ||
| Rear (All FWD and AWD except 3.5L TiVCT and Police Vehicles) | 30 mm (1.1811 in) ±12 mm (0.4724 in) | ||
| Rear (Police Vehicles) | 50 mm (1.9685 in) ±12 mm (0.4724 in)(1) | ||
|
|||
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/Split | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Front | |||||||||
| Camber (All-Wheel Drive (AWD) Vehicles) | -0.4° ± 0.75° | -0.6° ± 0.75° | 0.2° ± 0.75°(1) | ||||||
| Camber (Front Wheel Drive (FWD) Vehicles) | -0.5° ± 0.75° | -0.7° ± 0.75° | 0.2° ± 0.75°(1) | ||||||
| Camber (Police Vehicles) | -0.45° ± 0.75° | -0.65° ± 0.75° | 0.2° ± 0.75°(1)(2) | ||||||
| Caster (All-Wheel Drive (AWD) Vehicles) | 3.3° ± 0.75° | 3.5° ± 0.75° | -0.2° ± 0.75°(3) | ||||||
| Caster (Front Wheel Drive (FWD) Vehicles) | 3.4° ± 0.75° | 3.6° ± 0.75° | -0.2° ± 0.75°(2) | ||||||
| Caster (Police Vehicles) | 3.1° ± 0.75° | 3.3° ± 0.75° | -0.2° ± 0.75°(3)(2) | ||||||
| Toe (positive value is toe in, negative value is toe out) | - | - | 0.2° ± 0.2° | ||||||
| Rear | |||||||||
| Camber (All-Wheel Drive (AWD) Vehicles) | -0.7° ± 0.75° | -0.7° ± 0.75° | - | ||||||
| Camber (Front Wheel Drive (FWD) Vehicles) | -0.85° ± 0.75° | -0.85° ± 0.75° | - | ||||||
| Camber (Police Vehicles) | -0.5° ± 0.75°(2) | -0.5° ± 0.75°(2) | - | ||||||
| Toe (positive value is toe in, negative value is toe out), All Vehicles | 0.12° ± 0.2° | 0.12° ± 0.2° | 0.24° ± 0.2° | ||||||
| Thrust Angle | - | - | 0.0° ± 0.3° | ||||||
|
|||||||||