LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2014 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1248 (Engine System - General Information) >> General Procedures >> Powertrain Drivetrain Mount Neutralizing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Drivetrain Mount Neutralizing

WARNING: This page is about a different car, the 2017 Ford Edge. However, it is still accessible from the selected car via links, so may be relevant.

Adjustment 

NOTE: Refer to the appropriate article and procedure for special instructions on loosening and tightening mount fasteners.

  1. 1.

    With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview .

  1. 2.

    Loosen, but do not remove, the powertrain/drivetrain mount fasteners.

  1. 3.

    Lower the vehicle.

  1. 4.

    NOTE: Do not twist or strain the powertrain/drivetrain mounts or damage to the mounts may occur.

    Start the vehicle and move it in forward 0.6 m (1.97 ft) - 1.2 m (3.94 ft). Then move the vehicle in reverse the same distance.

  1. 5.

    Raise and support the vehicle.

  1. 6.

    Tighten the powertrain/drivetrain mount fasteners.

  1. 7.

    Lower the vehicle.

  1. 8.

    Test the system for normal operation.
scientia non olet · About LEMON Manuals