July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hydraulic Control Unit (HCU): Installation

1.

To install, reverse the removal procedure.

2.

If a new HCU/ ABS module was installed, download the Anti-Lock Brake System (ABS) module configuration to the scan tool. Refer to: Module Configuration - System Operation and Component Description .

3.

If a new HCU/ ABS module was installed, carryout the initialization using the scan tool and following the scan tool on-screen instructions.

4.

Bleed the brake system. Refer to: Brake System Pressure Bleeding .