Anti-Theft System - Passive Anti-Theft System DTCS (With Keyless Entry And Pushbutton Start): BCM
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B10D5:94 | PATS Antenna: Unexpected Operation | The BCM received an incomplete or corrupt response from the PATS transceiver. INSTALL a new PATS transceiver. REFER to: Passive Anti-Theft System (PATS) Transceiver |
| B10D7:05 | PATS Key: System Programming Failure | GO to Pinpoint Test D |
| B10D7:55 | PATS Key: Not Configured | The BCM Configurable Engine Immobilizer (CEI) was not configured after PMI. FOLLOW the diagnostic scan tool on-screen instructions after the PMI process to perform the Configurable Engine Immobilizer (CEI) Lock Configuration. |
| B10D7:81 | PATS Key: Invalid Serial Data Received | GO to Pinpoint Test E |
| B10D7:87 | PATS Key: Missing Message | GO to Pinpoint Test F |
| B10D8:00 | PATS Key Less Than Minimum Programmed: No Sub Type Information | Less than 2 keys are programmed. PROGRAM additional keys (minimum of 2 keys must be programmed). REFER to: Key Programming Using Diagnostic Equipment |
| B10DA:51 | PATS Target Identifier: Not Programmed | There is an unprogrammed PATS key. PROGRAM the PATS key. REFER to: Key Programming Using Diagnostic Equipment |
| B11CC:51 | Immobilizer Keyless Vehicle Secret key: Not Programmed | There is no RFA module ID stored in the BCM. CARRY OUT a parameter reset. REFER to: Passive Anti-Theft System (PATS) Parameter Reset |
| B1399:05 | Personalized Key Synchronisation: System Programming Failure | ERASE and PROGRAM all of the customer's keys. REFER to: Erase All Keys and Key Programming |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) |