Repair procedures: Replacement

WARNING: This page is about a different car, the 2014 Hyundai Elantra GT and 2013 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative (-) battery terminal.
Remove the auto defogging sensor cover (A), by pulling it out.

Fig 1: Identifying Auto Defogging Sensor Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the connector (A) and then remove the auto defogging sensor (B).

Fig 2: Identifying Connector And Auto Defogging Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Install in the reverse order of removal.