Front Strut and Spring Assembly: Installation
- 1.
Position the front strut and spring assembly and install the new front strut and spring assembly upper bolts.Torque: 26 lb.ft (35 Nm)
- 2.
Install the cowl panel. Refer to: Cowl Panel .
- 3.
Install the new front strut and spring assembly-to-wheel knuckle bolts and nuts.Torque: 173 lb.ft (235 Nm)
- 4.
Position the front stabilizer bar link and install the new front stabilizer bar link upper nut. Position and clip the wheel speed sensor harness.Torque: 85 lb.ft (115 Nm)
- 6.
Install the wheel and tire. Refer to: Wheel and Tire .
- 7.
Check and if necessary adjust front camber. Refer to: Front Camber Adjustment .