July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cylinder Head Temperature (CHT) Sensor - 3.5L GTDI

Fig 1: Cylinder Head Temperature Sensor With Torque Specifications

GFD83441

Courtesy of FORD MOTOR COMPANY

Item	Part Number	Description
1	14A464	Cylinder Head Temperature (CHT) sensor electrical connector
2	6G004	CHT sensor
3	W503274	Ground wire-to-engine front cover bolt

1.

Remove the Air Cleaner (ACL) outlet pipe and the ACL. For additional information, refer to Intake Air Distribution and Filtering .

2.

Position the ACL -to-RH turbocharger intake tube aside. For additional information, refer to Intake Air Distribution and Filtering .

3.

Remove the ground wire-to-engine front cover bolt.

4.

Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.

5.

Remove and discard the CHT sensor.
- To install, tighten to 10 Nm (89 lb-in).

6.

To install, reverse the removal procedure.
- Do not reuse the CHT sensor. Install a new sensor.