Stop Start Disable Conditions
Stop-Start is inhibited if any of the following DTCs are set. This is intended to ensure that starting is not compromised.
- FVR (P0001, P0003, P0004), Low Pressure Fuel (P008A, P008B), Crank Fuel Pressure (P00C6),
- VVT (P0010, P0011, P0012, P0013, P0014, P0015, P0016, P0017),
- AAT (P0072, P0073, P0074), IAT (P00CE), High Pressure Fuel (P0087, P0088),
- IAT2 (P0096, P0097, P0098), MAF (P0100, P0102, P0103, P1101), MAF/TP (P0068),
- MAP (P0106, P0107, P0108, P0109), IAT1 (P0111, P0112, P0113, P0114),
- ECT (P0116, P0117, P0118, P0119), TP1 (P0122, P0123), TP2 (P0222, P0223),
- Fuel Monitor (P0148, P0171, P0172), LP FP (P018C, P018D), FRP (P0192, P0193),
- Injectors (P0201, P0202, P0203, P0204), Misfire (P0300, P0301, P0302, P0303, P0304),
- Fuel Pump (P025A, P025B, P0230, P0231, P0232, P0627, P064A),
- CMP A (P0340, P0341, P0344), Coils (P0351, P0352, P0353, P0354),
- CMP B (P0365, P0366, P0369), Idle Speed (P0505, P0506, P0507), Starter (P0615, P06E9, P162F),
- ETC (P2100, P2101, P2107, P2111, P2112), APP (P2122, P2123, P2127, P2128, P2135, P2138),
- BARO (P2227, P2228, P2229, P2230), PCV (P2282),
- Coils (P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310)