LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Escape Titanium, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Charging And Controls - 2.0L ECOBOOST (177KW/240PS) - Mi4 >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Driver Module (FPDM): Removal

NOTE: The fuel pump driver module is located under the right rear seat cushion, under the carpet.
  1. NOTE: LH shown in illustration, RH is similar.

    Position the right rear door weatherstrip aside and then remove the right rear door scuff plate.

    GFD255114Courtesy of FORD MOTOR COMPANY
  2. Remove the right rear seat, RH hinge cover.
    GFD255115Courtesy of FORD MOTOR COMPANY
    1. Remove the right rear seat RH hinge retaining bolt and then position the hinge up and out of the way.
    GFD255116Courtesy of FORD MOTOR COMPANY
  3. NOTE: Position the carpet aside for access.

    1. Disconnect the FPDM electrical connector.
    2. Remove the FPDM retaining nuts and then remove the FPDM.

GFD255117Courtesy of FORD MOTOR COMPANY