Steering Column: Installation

WARNING: This page is about a different car, the 2020 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: DO NOT hammer, pry or force steering column and column shafts during installation or removal. Failure to follow this instruction may cause damage to steering components that could lead to loss of steering control during vehicle operation and could result in serious personal injury or death.

To install, reverse the removal procedure.
NOTE: This step is only necessary when installing a new component.

With the steering system fully assembled, remove the anti-rotation pin and the spindle bolt.

Courtesy of FORD MOTOR COMPANY