Pinpoint Test F: P0611
WARNING: This page is about a different variant/trim than selected.
- Normal Operation and Fault Conditions
Refer to the DTC Fault Trigger Conditions.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P0611:00 Fuel Injector Control Module Performance: No Sub Type Information This DTC sets when a PCM vehicle options error has occurred. Possible Sources
- Aftermarket performance products
- Damaged PCM
- F1 CHECK FOR PCM (POWERTRAIN CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE) S
- Using a diagnostic scan tool, perform the PCM self-test.
- Check for any other PCM related symptoms.
Is DTC P0611 the only DTC present?
Yes Reprogram or update the calibration. Refer to MODULE PROGRAMMING . Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products.Repeat the self test. If the concern is still present, refer to PCM GUIDED ROUTINE TESTING No DIAGNOSE all PCMDTCs.