Pinpoint Test H: P119F
WARNING: This page is about a different variant/trim than selected.
- Normal Operation and Fault Conditions
Refer to the DTC Fault Trigger Conditions.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition PCM P119F:00 Internal Control Module Fuel Pressure Control Performance: No Sub Type Information This DTC sets when the redundant calculation of fuel rail pressure does not match with the calculation of fuel rail pressure being used for fuel injection. Possible Sources
- Aftermarket performance products
- PCM programming error
- H1 CHECK FOR PCM (POWERTRAIN CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE) S
- Using a diagnostic scan tool, perform the PCM self-test.
- Check for any other PCM related symptoms.
Is DTC P119F the only DTC present?
Yes Check for aftermarket performance products. If no aftermarket performance products are present, check for other DTCs or drive symptoms and diagnose those first. If no other DTCs are present, clear the DTC and repeat the self-test. If the DTC is retrieved again, reprogram or update the calibration. Refer to MODULE PROGRAMMING . Repeat the self test.Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products.Repeat the self test. If the concern is still present, refer to PCM GUIDED ROUTINE TESTING No DIAGNOSE all PCMDTCs.