Cruise Control Radar Alignment
For information on Ford Color Coded Illustrations refer to OEM Color Coding .
Special Tool(s) / General Equipment
| Ford Diagnostic Equipment |
|---|
Adjustment
Vertical Alignment
NOTE:
Damage to the CCM (cruise control module) bracket may affect correct alignment. When aligning the CCM (cruise control module), inspect the CCM (cruise control module) bracket for damage and repair as necessary before carrying out the alignment procedure.
- Place the vehicle on a wheel alignment bay station.
-
NOTE: The vertical alignment for the CCM is a software calibration. No manual adjustment is needed for this procedure. The scan tool calibrates the CCM through the CCM procedure in programmable parameters.
Follow the scan tool on-screen instructions to carry-out the CCM calibration procedure. Use the General Equipment: Ford Diagnostic Equipment
Horizontal Alignment
NOTE: The horizontal alignment for the CCM (cruise control module) is a software calibration. No manual adjustment is needed for this procedure. The scan tool calibrates the CCM (cruise control module) through the CCM (cruise control module) procedure in programmable parameters. -
NOTE: The vehicle's engine must be running during the horizontal alignment procedure. Failure to leave the engine running throughout the entire procedure results in the cancellation of the alignment procedure and the system remains non-functional.
Start the engine.
- Follow the scan tool on-screen instructions to carry-out the CCM calibration procedure. Use the General Equipment: Ford Diagnostic Equipment