Front HALFSHAFT Speed Sensor: Removal

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
1. Remove the pin-type retainer.
2. Remove the bolts and the radiator air deflector.
3. Remove the bolts.
4. Remove the retainers and the engine undershield.
Courtesy of FORD MOTOR COMPANY
Disconnect the front halfshaft speed sensor electrical connector.

Courtesy of FORD MOTOR COMPANY
Remove the bolt and the front halfshaft speed sensor.

Courtesy of FORD MOTOR COMPANY
NOTE: The O-ring seals are to be reused unless damaged.

Clean and inspect the front halfshaft speed sensor O-ring for damage and install new front halfshaft speed sensor as necessary.

Courtesy of FORD MOTOR COMPANY