Front Section Center Assembly/Detaching and Attaching

Detaching And Attaching Front Section Center Assembly:

Detaching and attaching front section center assembly

Removal, installation

1 Remove bumper
2 Unscrew bottom section of hood lock (10)
Installation: Check and grease hood lock

3 Unhook hood pull cable (12)
4 Remove radiator mounts (11) in direction of arrow
5 Remove turn signal lamp
6 Pull vacuum hose and connector off of headlamp
7 Screw bottom (14) and top (15) fitting off of front section center assembly (8)
8 Remove front section center assembly
9 Reinstall in opposite order
Installation: Use new cable straps and other ties