Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front license plate bracket.

Ambient Temperature Sensor:

3. Disconnect the wire harness connector from the ambient temperature sensor.
4. Disengage the sensor retaining tabs and remove the ambient temperature sensor from the front license plate bracket.

INSTALLATION
1. Install the ambient temperature sensor onto the front license plate bracket Make sure the retaining tabs are fully engaged.
2. Connect the wire harness connector to the ambient temperature sensor.
3. Install the front license plate bracket.
4. Reconnect the battery negative cable.