Fuel Pressure Sensor - Removal

REMOVAL

WARNING: No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.

NOTE: To avoid leakage problems, the rail pressure sensor should not be removed unless it is to be replaced.

1. Disconnect negative battery cable.
2. Remove engine cover.
3. Unplug electrical connector at fuel rail pressure sensor.
4. Remove the right fuel rail.
5. Position the fuel rail in a soft jawed vise.
6. Remove rail pressure sensor.