Poor Engine Performance Problems
- Disconnect 4-pin connector at distributor, and install a jumper wire between pins "A" and "C" of distributor connector. If problem remains, check other causes of poor engine performance.
- If problem disappeared, remove jumper wire and reconnect 4-pin connector. Without disconnecting 10-pin ESC connector, attach jumper wire from pin "A" to pin "B". If problem remains, proceed to step 5).
- If problem disappeared in step 2), remove jumper wire and disconnect 10-pin connector at controller. Connect ohmmeter leads to pins "B" and "K". Resistance should read 175-375 ohms. If OK, check for engine noises other than detonation that might cause input to sensor.