Electronic Control Module (ECM) Operation: Notes

The Electronic Control Module (ECM) is the control center of the CCC system. The ECM is located in the passenger compartment on all vehicles. It is located behind right kick panel on Astro and Safari vans, beneath driver's seat on "G" series vans, behind left side of dash on "P" series vans, or behind right side of dash on "P" series vans, or behind right side of dash, near glove box, on all other models.

The ECM senses engine operating conditions, processes input signals, and controls the various systems that affect vehicle performance. The ECM also performs the diagnostic function of the system. It can recognize operational problems, alerts the driver through the "SERVICE ENGINE SOON" light, and stores trouble codes. The ECM senses engine operating conditions and controls the systems shown.

Two different types of ECM's are used in these vehicles. All 2.5L engine equipped vehicles use a "GMP4" computer with 2 parts: controller and "MEM-CAL" unit. All other engines use a "GMCM" computer with 3 parts: controller, "PROM", AND "CALPAK".