LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1987 >> Forward Control 6.2 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Remove/Install/Overhaul) >> Oxygen Sensor >> Engine Controls - Remove/Install/Overhaul >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Controls - Remove/Install/Overhaul: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 GMC Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever oxygen sensor is removed, coat threads with anti-seize compound before reinstalling. New oxygen sensors already have this compound applied to threads.
  2. Install oxygen sensor in exhaust pipe and tighten sensor to 30 ft. lbs. (41 N.m). Reconnect electrical connector to oxygen sensor. Reconnect negative battery terminal.
scientia non olet · About LEMON Manuals