Removal & Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Vandura Special, 1994 GMC Vandura, 1994 GMC Rally Camper Special, 1994 GMC Rally, and 1994 GMC Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
- Remove air cleaner assembly. Disconnect electrical lead from TP sensor. Remove attaching screws, lock washers, retainers, and TP sensor.
- To install, reverse removal procedure. Adjust TP sensor to specification. See ADJUSTMENTS - GASOLINE article in the ENGINE PERFORMANCE section. When replacing a TP sensor, ensure correct part number is used. Use Loctite on TP sensor attaching screws.