LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1991 >> Forward Control 7.4 N >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering Pump >> Overhaul >> Disassembly (Model TC)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembly (Model TC)

  1. Clamp front hub in soft-jawed vise. Pry tab outward and remove reservoir clips (if equipped). See Figure . Remove reservoir or return tube and "O" ring. Using Pulley Remover (J-25034-B), remove pulley from shaft if not previously removed.
  2. Remove fitting, "O" ring, flow control valve and spring. Note location of beveled side of snap ring. Remove snap ring, drive shaft, and bearing. See Figure . Using screwdriver, remove drive shaft seal from housing. Remove thrust plate retaining ring by inserting punch into access hole and disengaging retaining ring.
  3. Using a brass drift, tap on thrust plate and remove. Remove "O" ring, pump ring, rotor and vanes. Remove dowel pins, pressure plate, "O" ring, and pressure plate spring. Remove "O" ring, dowel pin, and sleeve.
scientia non olet · About LEMON Manuals