Test 19A - Testing Estimated Time Function

WARNING: This page is about a different car, the 1995 Plymouth Voyager, 1995 Plymouth Grand Voyager, 1995 Dodge Grand Caravan, 1995 Dodge Caravan, and 1995 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform TEST VER-1B after each repair.

CAUTION: Always turn ignition off prior to disconnecting or connecting any module connector.

Disconnect Body Control Module (BCM) Blue connector. BCM is located behind left side knee panel. Check condition of connector, and clean or repair connector as necessary. If connector is okay, go to next step.
Turn ignition on, engine off. Using scan tool in voltmeter mode, check voltage on BCM Blue connector terminal No. 11 (Dark Blue wire). If voltage is less than 10 volts, repair open Dark Blue wire. If voltage is more than 10 volts, replace BCM.