LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1993 >> Yukon Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Window Regulator >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Window Regulator: Installation

  1. Install regulator and motor assembly to the module panel.
  2. Install window, bend the tab upward on the window run channel.
  3. Install window and module to the door.
  4. Connect lock rods to the retainer clips.
  5. Install module panel screws, starting with the top front, and top rear screws.
  6. Connect door lock linkage.
  7. Install new water deflectors. Refer to WATER DEFLECTOR  .
  8. Install door trim panel. Refer to DOOR TRIM PANEL  .
  9. Connect negative battery cable.
Fig 1: Identifying Front Window Regulator
G00125834Courtesy of GENERAL MOTORS CORP.
Fig 2: Identifying Rear Side Window Regulator
G00125835Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals