LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1994 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - Remove/Install/Overhaul) >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1994 GMC Yukon, 1994 GMC Suburban, 1994 GMC Pickup, 1994 GMC Cab & Chassis, and 1994 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air cleaner assembly. Disconnect electrical lead from TP sensor. Remove attaching screws, lock washers, retainers, and TP sensor.
  2. To install, reverse removal procedure. Adjust TP sensor to specification. See ADJUSTMENTS - GASOLINE article in the ENGINE PERFORMANCE section below. When replacing a TP sensor, ensure correct part number is used. Use Loctite on TP sensor attaching screws.
scientia non olet · About LEMON Manuals