Lock Function Inoperative/Unlock Function Operates Normally
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 1998 Saturn SW2, 1998 Saturn SW1, 1998 Saturn SL2, 1998 Saturn SL1, and 1998 Saturn SL. However, it is still accessible from the selected car via links, so may be relevant.
- Roll windows down. Attempt to lock doors using door interior switches. If doors lock with both driver and passenger door switches, go to next step. If doors do not lock with both driver and passenger door switches, replace lock relay located in instrument panel junction block. Repeat RKE SYSTEM CHECK under SYSTEM TESTS.
- Measure voltage between ground and RKE module connector terminal "B" (Light Blue wire). Press lock button on one transmitter. If battery voltage is present when LOCK button is pressed, check Light Blue wire for a short to ground. If wire is okay, replace RKE module. Repeat RKE SYSTEM CHECK under SYSTEM TESTS.
- If battery voltage is not present when LOCK button is pressed, repair open circuit in Light Blue wire. Repeat RKE SYSTEM CHECK under SYSTEM TESTS.