Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connectors.
Push in on the switch bank in order to install the switch bank.

Fig 1: Connecting Electrical Connectors
Courtesy of GENERAL MOTORS CORP.
Install the bolts/screws to the switch bank to instrument panel.
Tighten

Tighten the bolts/screws to 2.5 N.m (22 lb in).

Fig 2: Installing Switch Bank
Courtesy of GENERAL MOTORS CORP.
Install the instrument panel accessory trim plate.

Fig 3: Locating Traction Control Switch

Courtesy of GENERAL MOTORS CORP.