Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT -- INSTRUMENT PANEL (I/P) ACCESSORY (AZTEK) in Instrument Panel, Gages and Console.

Fig 1: Locating Traction Control Switch
Courtesy of GENERAL MOTORS CORP.
Remove the bolts/screws from the switch bank to instrument panel.
Pull straight out from the instrument panel in order to remove the switch bank from the instrument panel.

Fig 2: Removing Switch Bank
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors.

Fig 3: Disconnecting Electrical Connectors

Courtesy of GENERAL MOTORS CORP.