Shift Cable
- Position the gearshift lever into Park. Apply the parking brake.
- Raise and support the vehicle. Disconnect shift cable at transmission bracket. See Fig 1
. Position the transmission range lever to Park. Rotate the range select lever clockwise until it reaches the full mechanical stop position.
- Install the transmission shift cable into the bracket with the cable adjustment button up. See Fig 2
.
- Install the shift cable to the range selector lever pin. Press cable adjustment button down. Insert the retainer to the shift cable.
- Lower the vehicle. Check for proper shift cable operation. Replace cable if cable binds or does not adjust properly.
Courtesy of GENERAL MOTORS CORP.
Courtesy of GENERAL MOTORS CORP.