LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> Safari Van Cargo, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 863 (Keyless Entry System) >> Repair Instructions >> Remote Control Door Lock Receiver Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the remote keyless entry module to the carrier.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the remote keyless entry module screws to the bracket (3).

    Tighten 

    Tighten the remote keyless entry module screws to the bracket (3) to 2 N.m (18 lb in).

  3. Connect the remote keyless entry antenna (2) to the receiver (5).
  4. Connect the remote keyless entry electrical connector (4) to the receiver (5).
  5. Install the left knee bolster. Refer to KNEE BOLSTER REPLACEMENT - LEFT in Instrument Panel, Gages, and Console.
  6. Reprogram the transmitter. Refer to TRANSMITTER PROGRAMMING .
  7. Verify that the system operates properly.
    Fig 1: Locating Remote Keyless Entry Components
    G01566582Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals