LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> Yukon Base, 5.3 T, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Remote Keyless Entry Systems - Old Style) >> Symptom Tests >> Test K: Keyless Entry Does Not Program (Base)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test K: Keyless Entry Does Not Program (Base)

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect Remote Control Door Lock Receiver (RCDLR). Using DVOM, check continuity between RCDLR connector terminal "L" (Black/White wire) and Data Link Connector (DLC) terminal No. 8. See Figure . If continuity exists, go to next step. If continuity does not exist, go to step  3 .
  2. Replace RCDLR. See REMOTE CONTROL DOOR LOCK RECEIVER  under REMOVAL & INSTALLATION. After repair, recheck system.
  3. Repair open in Black/White wire between RCDLR and DLC. After repair, recheck system.
scientia non olet · About LEMON Manuals