Removal Procedure
IMPORTANT:
When removing an injection nozzle, use the J 29873
. See Special Tools . Remove the nozzle using the 30 mm hex portion. Failure to do so will result in damage to the injection nozzle.
- Remove the negative battery cables.
- Remove the fuel line clip.
- Remove the fuel return hoses (1) from the nozzle (2).
- Remove the fuel injection line.
- Cap the nozzle and the lines.
- Remove the injection nozzle using the J 29873 . See Special Tools .
CAUTION:
Refer to Battery Disconnect Caution in Cautions and Notices.