Disc Brake Component Specifications

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Application	Specification
Application	Metric	English
Front Brake Pads
Minimum Lining Thickness	1.00 mm	0.039 in
New Lining Thickness	11.00 mm	0.433 in
Front Brake Rotors
Discard Thickness *	23.00 mm	0.906 in
Maximum Assembled Lateral Runout	0.05 mm	0.002 in
Maximum Groove Depth	1.50 mm	0.059 in
Maximum Thickness Variation	0.025 mm	0.001 in
New Thickness	25.00 mm	0.984 in
Rear Brake Pads
Minimum Lining Thickness	1.00 mm	0.039 in
New Lining Thickness	10.00 mm	0.394 in
Rear Brake Rotors
Discard Thickness *	7.50 mm	0.295 in
Maximum Assembled Lateral Runout	0.15 mm	0.006 in
Maximum Groove Depth	1.50 mm	0.059 in
Maximum Thickness Variation	0.025 mm	0.001 in
New Thickness	9.00 mm	0.354 in
* All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing the rotor, replace any rotor that does not meet the minimum thickness specification.