Scan Tool Data Definitions
- 8 Digit GM Part Number
-
The scan tool displays the part number of the module.
- Balance
-
The scan tool displays -50 to +50. The Balance between the right and left audio output.
- Bass
-
The scan tool displays 0-100%. The percentage of bass selected at the radio.
- Battery Voltage
-
The scan tool displays 0-18 Volts. The Voltage measured from the radio or amplifier's ignition positive voltage circuit to ground.
- Cal. Module 1 Part No.
-
The scan tool displays the part number of the modules software.
- Cal. Module 1 Suffix
-
The scan tool displays the suffix of the modules software.
- Chime Volume
-
The scan tool displays 0-100%. The percentage at which the chime volume has been calibrated to.
- Fade
-
The scan tool displays -50 to +50. The Fade between the front and rear audio output.
- Ignition Since Current DTC
-
The scan tool displays 0-225 Cycles. The number of ignition cycles since a current DTC was set.
- Midrange
-
The scan tool displays 0-100%. The percentage of midrange selected at the radio.
- Operational S/W Part No
-
The scan tool displays the part number of the modules software.
- Operational S/W Suffix
-
The scan tool displays the suffix of the modules software.
- Signal Strength
-
The scan tool displays 0-225 dB. The signal strength of the radio frequency.
- Treble
-
The scan tool displays 0-100%. The percentage of treble selected at the radio.
- Volume
-
The scan tool displays 0-100%. The percentage of volume selected at the radio.