Removing the Customers Code
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
Important: Either the customers code or the factory backup code can be used in order to remove the customers code.
Perform the following steps in order to remove the customers code:
- Turn the ignition to the ACC or RUN position.
- Turn the radio OFF.
Important: If the display changes to - the theft deterrent is deactivated and no code is stored.
- Press and hold pushbuttons 1 and 4 for approximately 6 seconds until the display changes to SEC.
- Press the HR button.
- Set the first 2 digits (0-19) of the code with the HR button.
- Set the next 2 digits (0-99) of the code with the MIN button.
- Press the AM-FM button in order to enter the code.
- The theft deterrent is de-activated when - is displayed and then the clock is displayed.