Section 1212 (Body Front End): Specifications
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specification
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Battery Tray Bolts | 31 N.m | 23 lb ft |
| Fascia to Fender Reinforcement Stud Nuts | 7 N.m | 62 lb in |
| Fascia to Skid Bar Bracket Bolts | 5 N.m | 44 lb in |
| Fender Front Flange Screws | 2 N.m | 18 lb in |
| Fender Front Upper Flange Screws | 2 N.m | 18 lb in |
| Fender Rear Center Flange to Hinge pillar Screw | 10 N.m | 89 lb in |
| Fender Rear Inner Panel Screw | 2 N.m | 18 lb in |
| Fender Reinforcement Nuts | 7 N.m | 62 lb in |
| Fender to Center Flange Screw | 10 N.m | 89 lb in |
| Fender to Rocker Panel Screw | 2 N.m | 18 lb in |
| Fender to Upper Flange Screws | 2 N.m | 18 lb in |
| Fender to Upper Front Flange Screws | 2 N.m | 18 lb in |
| Fender to Upper Hinge Pillar Bracket Screw | 4 N.m | 36 lb in |
| Fender to Upper Hinge Pillar Screw | 4 N.m | 36 lb in |
| Fender to Wheelhouse Wheel Opening Screws | 3 N.m | 26 lb in |
| Fender Wheel Opening to Filler Panel Bolts | 2 N.m | 18 lb in |
| Filler Panel to Frame Rail Bolts | 2 N.m | 18 lb in |
| Filler Panel to Lower Fender Flange Bolt | 2 N.m | 18 lb in |
| Filler Panel to Skid Bar Bolts | 5 N.m | 44 lb in |
| Filler Panel to Wheelhouse Bolts | 10 N.m | 89 lb in |
| Hinge to Frame Rail Nuts | 25 N.m | 18 lb ft |
| Hinge to Hood Bolts | 25 N.m | 18 lb ft |
| Hood Bumper Jam Nut | 10 N.m | 89 lb in |
| Hood Latch Bolts | 10 N.m | 89 lb in |
| Hood Stop Bracket Bolts | 25 N.m | 18 lb ft |
| Hood Striker Bolt | 10 N.m | 89 lb in |
| Inner Lower Rear Panel Bolts | 2 N.m | 18 lb in |
| Radiator Support to Skid Bar Bracket Bolts | 2 N.m | 18 lb in |
| Rear Inner Panel Bolts | 2 N.m | 18 lb in |
| Skid Bar to Frame Rail Bolts | 50 N.m | 37 lb ft |
| Wiper Arm Nuts | 25 N.m | 18 lb ft |