LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1292 (Antilock Brake System) >> Repair Instructions >> Brake Modulator Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electronic brake control module (EBCM) harness connector.
  2. Remove the 6 brake pipes from the brake modulator assembly (1).
  3. Plug the brake pipes in order to prevent loss or contamination of brake fluid.
  4. Remove 2 bolts (2) from the brake pressure modulator bracket (3).
    Fig 1: Removing Brake Pipes & Modulator Bracket
    G01546238Courtesy of GENERAL MOTORS CORP.
  5. Remove nut (1) and the brake pressure modulator assembly and bracket.
  6. Remove 3 nuts and the brake pressure modulator assembly from the bracket.
Fig 2: Removing Brake Pressure Modulator Assembly
G01546239Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals