LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1292 (Antilock Brake System) >> Repair Instructions >> Deceleration Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the deceleration sensor (2) to the vehicle.
    Fig 1: Installing Deceleration Sensor
    G01546259Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the two bolts (1) that retain the deceleration sensor.

    Tighten 

    Tighten the two deceleration sensor bolts to 21 N.m (15 lb ft).

  3. Connect the deceleration sensor electrical connector.
  4. Install the upper deceleration sensor bracket (2) and the bolt (1).
    Fig 2: Installing Upper Deceleration Sensor Bracket And Bolt
    G01546260Courtesy of GENERAL MOTORS CORP.

    Tighten 

    Tighten the upper deceleration sensor bolt to 21 N.m (15 lb ft).

  5. Install the LH front seat. Refer to SEAT REPLACEMENT - FRONT BUCKET in Seats.
scientia non olet · About LEMON Manuals