Installation Procedure
WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front end discriminating sensor (1).
- Install the front end discriminating sensor - left fasteners (2).
Tighten: Tighten the fasteners to 8 N.m (71 lb in).
- Install the front end discriminating sensor - left electrical connector (3).
- Enable the SIR system. Refer to SIR Disabling and Enabling Zone 1 .
NOTE:
Refer to Fastener Notice in Cautions and Notices.