Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inflatable Restraint I/P Module And Fasteners

Courtesy of GENERAL MOTORS CORP.

Install the inflatable restraint I/P module (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the mounting fasteners (2,3) to the I/P module.
Tighten: Tighten fasteners to 20 N.m (15 lb ft).

Fig 2: IP Module Connector And IP Module Pigtail

Courtesy of GENERAL MOTORS CORP.

Connect the I/P module connector (1).

Fig 3: IP Compartment And Fastener

Courtesy of GENERAL MOTORS CORP.

Install the I/P compartment (2). Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 5 .