LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Steering Wheel Module Coil Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the front wheels are in the straight ahead position.
    2. IMPORTANT: Make sure the turn signal switch is in the neutral position or turn signal switch pin may be damaged.
  2. Place turn signal switch in neutral position.
    3. IMPORTANT: When installing a new steering wheel module coil, remove the lock pin prior to installing the handle.
    Fig 1: Steering Wheel Module Coil, Steering Column And Claws
    GM820030Courtesy of GENERAL MOTORS CORP.
  3. Install the steering wheel module coil (1), engage all 3 retaining claws (2).
  4. Center the steering wheel module coil, if necessary. Refer to Inflatable Restraint Steering Wheel Module Coil Centering in Steering Wheel and Column.
    5. Fig 2: Steering Wheel Module Coil Electrical Connector Location
    GM839654Courtesy of GENERAL MOTORS CORP.
  5. Connect the steering wheel module coil electrical connector (1).
    6. Fig 3: Identifying Upper Steering Column Components
    GM820027Courtesy of GENERAL MOTORS CORP.
  6. Install the steering column lower trim cover (6). Secure with three screws.
  7. Install the steering wheel. Refer to Steering Wheel Replacement in Steering Wheel and Column.
  8. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
scientia non olet · About LEMON Manuals