LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1574 (Power Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align and install the locating tabs on the seat control module with the seat pan.
  2. Connect the electrical connectors to the seat control module as necessary.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the screw that retains the seat control module to the seat pan.

    Tighten:  Tighten the screw to 3 N.m (26 lb in).

    Fig 1: Removing/Installing Seat Control Module Retaining Screw
    GM752957Courtesy of GENERAL MOTORS CORP.
  4. Install the seat pan to the seat assembly.
  5. Install the nuts which retain the seat pan to the seat assembly.

    Tighten:  Tighten the nuts to 25 N.m (18 lb ft).

    Fig 2: View Of Underside Of Seat Adjuster Frame & Mounting Nuts
    GM752864Courtesy of GENERAL MOTORS CORP.
  6. Install the 3 seat switch bezel screws. Refer to Seat Switch Bezel Replacement .
  7. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals