Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Position the memory seat switch to the lock and door lock and side window switch (1).

Fig 1: Identifying Switch Panel Electrical Connector
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connector (2) to the memory seat switch.
Install the door lock and side window switch (1). Verify that the front retaining clips and the rear retaining clips are fully seated.

Fig 2: Removing/Installing Door Lock & Side Window Switch - Driver
Courtesy of GENERAL MOTORS CORP.