LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1596 (Seat System) >> Repair Instructions >> Memory Seat Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 seat switch bezel screws. Refer to SEAT SWITCH BEZEL REPLACEMENT  .
  2. Remove 4 nuts that attach the seat pan to the seat assembly.
    3. Fig 1: 4 Nuts Attach Seat Pan To Seat Assembly
    G01641851Courtesy of GENERAL MOTORS CORP.
  3. Remove the clip from the front outboard seat pan stud. Discard the clip.
  4. Lift the seat pan up in order to allow access to the seat control module retaining screw.
  5. Remove the seat control module retaining screw.
    6. Fig 2: Seat Control Module Retaining Screw
    G01641852Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the electrical connectors from the seat control module as necessary.
  7. Remove the seat control module from the seat assembly.
scientia non olet · About LEMON Manuals