Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Position the sensor to the trim pad.

Fig 1: Locating Ambient Light Sensor
Courtesy of GENERAL MOTORS CORP.
In order to install the sensor to the trim pad, rotate the sensor clockwise 1/4 turn.
Position the trim pad to the upper portion of the instrument panel (IP).

Fig 2: View Of Instrument Panel (I/P) Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the sensor.
Remove the shop rags from the windshield defrost vents.
Install the trim pad to the IP. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER in Instrument Panel Gages and Console.
Install the windshield garnish moldings. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILLAR in Interior Trim.